Provides maximum gripping power on any size pipe up to 6″ in diameter.
Mombo Combo Stand
Mombo combo stands, made by American Grip, when you need to get all the way up to 23 feet.
Menace Arm Kit
This Menace Arm Kit enables you to boom a lighting fixture with either a junior or baby receiver. In the kit is a Combo Stand or Wind Up Stand depending on your needs, a Jumbo Grip Head to mount the arm to the stand, an ear with a 9.5″ anti-sag center post, two heavy duty straps, a Junior receiver with a baby pin adaptor, and shot bags for counter weights. The 15ft boom arm breaks down to two 7.5ft lengths for transport.
Mafer Clamp with 5/8
The Mafer Clamp with Baby (5/8″) Pin is strengthened to withstand greater clamping pressure than any other clamp of its kind. The protective pads in the jaws have also been reformulated for better gripping action.
Junior Offset 14
A useful grip accessory for precise positioning of a lighting fixture away from the stand. Also known as a ‘Swan Neck
Junior to Baby Spud Adapter
Machined from solid steel, the Stand Adapter is exceptionally strong. Used to convert a Junior 1-1/8 inch female receptor to a Baby, or standard 5/8 inch male stud.
Scissor Clip with Baby Pin
The Scissor Clamp is used to mount a small to medium size light fixture from a drop ceiling frame. It terminates in a standard 5/8″ Baby stud.
Gaffer Grip with Baby Spud
Quick mount multipurpose clamp
Works on both flat and round surfaces
Has one fixed baby 5/8″ (16mm) stud and one reversible baby 5/8″ (16mm) receiver
Magic Arm
The ends have female threads inside pins that a grip head can capture. Capable of handling small light fixtures, nets and flags, or even smaller cameras. Each end of the 2-section arm terminates in a 5/8″ stud.
Furniture Clamp Slider w/ 5/8″ Pin
“Hangie Downie” Clamp Adapter with 5/8 Pin
Designed to allow the mounting of a small light fixture to a Furniture Clamp
Can be mounted on any rod measuring up to 1″ diagonally8″ C-clamp with Spud
C-Clamp with 2 Baby Pins has 2 separate 5/8″ diameter pins at different angles so that the light fixtures may fit with minimal clearance.
MPTV Yolk to Spud Adapter
The MPTV Yoke Mount to Baby Receiver or Junior Adapter from Impact is a yoke-to-stand adapter that allows light fixtures that have no stud or socket to be mounted on a standard Baby or Junior light stand top. The adapter has a 5/8″ (16mm) socket to fit onto light stands with a 5/8″ stud. Alternatively, since its outer diameter is 1-1/8″, you can remove the tightening knob and use the MPTV as a Junior pin to fit onto a stand with a 1-1/8″ receiver. The adapter is constructed of zinc steel and has a 1/2″-13 bolt with a washer to attach to a yoke.
Junior Pipe Clamp
Terminates in a Junior Receiver and has a safety chain and cotter pin attached. Has a uniquely designed hook molded into the clamp which keeps the clamp on the pipe even with a light fixture attached, while the bolt is being tightened.
