Rent
Low Boy Combo Stand
Low boy combo stand made by American Grip.
Baby Stand
Baby stands, manufactured by American Grip are available in 3-rise and 2-rise options.
Mini Baby Stand
Mini Baby stands, made by American Grip.
-
Hi Roller Stand
Hi Roller Stands are equipped with 4 1/2″ grip heads and caster.
Medium Roller Stand
Medium Roller Stands are equipped with 4 1/2″ grip heads and caster.
Junior Roller Stand
Junior Roller Stands are equipped with Jr receivers and casters.
-
Mombo Combo Stand
Mombo combo stands, made by American Grip, when you need to get all the way up to 23 feet.
Super Crank-O-Vator Stand
Matthews Super Crank-o-vator stands are for very heavy loads.
Menace Arm Kit
This Menace Arm Kit enables you to boom a lighting fixture with either a junior or baby receiver. In the kit is a Combo Stand or Wind Up Stand depending on your needs, a Jumbo Grip Head to mount the arm to the stand, an ear with a 9.5″ anti-sag center post, two heavy duty straps, a Junior receiver with a baby pin adaptor, and shot bags for counter weights. The 15ft boom arm breaks down to two 7.5ft lengths for transport.
-
-
Mafer Clamp with 5/8
The Mafer Clamp with Baby (5/8″) Pin is strengthened to withstand greater clamping pressure than any other clamp of its kind. The protective pads in the jaws have also been reformulated for better gripping action.
-
Large Grip Head Lollipop
Large Grip Head 4.5″ or lollipop as referred to in the Grip Department.
-
Grip Head 2.5″
Mounts Lights / Accessories on C-Stands
Turtle Base C-Stand Legs
Turtle base c-stand legs.
-
Dolly Riser
Dolly Riser
-
Junior Offset 14
A useful grip accessory for precise positioning of a lighting fixture away from the stand. Also known as a ‘Swan Neck
-
-
Junior to Baby Spud Adapter
Machined from solid steel, the Stand Adapter is exceptionally strong. Used to convert a Junior 1-1/8 inch female receptor to a Baby, or standard 5/8 inch male stud.
-
Scissor Clip with Baby Pin
The Scissor Clamp is used to mount a small to medium size light fixture from a drop ceiling frame. It terminates in a standard 5/8″ Baby stud.
Junior Plate
4″ (10.16cm) Long Junior 1-1/8″ (28mm) Receiver
Chrome Plated Steel Finish-
Gaffer Grip with Baby Spud
Quick mount multipurpose clamp
Works on both flat and round surfaces
Has one fixed baby 5/8″ (16mm) stud and one reversible baby 5/8″ (16mm) receiver 
-
Magic Arm
The ends have female threads inside pins that a grip head can capture. Capable of handling small light fixtures, nets and flags, or even smaller cameras. Each end of the 2-section arm terminates in a 5/8″ stud.
