Hardware

Showing all 21 results

  • Boom Arm

    This Boom Arm will mount on a baby pin (c-stand, baby stand) or into a Jr. Receiver. It will extend up to 80 inches.

     

     

  • Menace Arm Kit

    This Menace Arm Kit enables you to boom a lighting fixture with either a junior or baby receiver. In the kit is a Combo Stand or Wind Up Stand depending on your needs, a Jumbo Grip Head to mount the arm to the stand, an ear with a 9.5″ anti-sag center post, two heavy duty straps, a Junior receiver with a baby pin adaptor, and shot bags for counter weights. The 15ft boom arm breaks down to two 7.5ft lengths for transport.

  • Cardellini Clamp

    The Cardellini clamp has a pair of jaws on one end and the baby pin on the other. It slips into tight spaces and grabs a multitude of shapes.

  • Mafer Clamp with 5/8

    The Mafer Clamp with Baby (5/8″) Pin is strengthened to withstand greater clamping pressure than any other clamp of its kind. The protective pads in the jaws have also been reformulated for better gripping action.

  • Large Grip Head Lollipop

    Large Grip Head 4.5″ or lollipop as referred to in the Grip Department.

  • Grip Head 2.5″

    Mounts Lights / Accessories on C-Stands

  • Dolly Riser

    Dolly Riser

  • Baby Double Header 14

    Especially useful when several light fixtures are needed in a relatively small amount of floor space. The Baby Double, mounted to a stand will allow four objects to be mounted. All female receivers are of the Posi-V-Lock design.

     

     

     

  • Junior Offset 14

    A useful grip accessory for precise positioning of a lighting fixture away from the stand. Also known as a ‘Swan Neck

  • Baby Spud 5/8

    Machined from solid steel adapter is exceptionally strong. Used to convert Junior 1-1/8″ female to Baby 5/8″ male.

  • Junior to Baby Spud Adapter

    Machined from solid steel, the Stand Adapter is exceptionally strong. Used to convert a Junior 1-1/8 inch female receptor to a Baby, or standard 5/8 inch male stud.

  • Junior Plate

    4″ (10.16cm) Long Junior 1-1/8″ (28mm) Receiver
    Chrome Plated Steel Finish

  • Gaffer Grip with Baby Spud

    Quick mount multipurpose clamp
    Works on both flat and round surfaces
    Has one fixed baby 5/8″ (16mm) stud and one reversible baby 5/8″ (16mm) receiver

  • Bead Board Holder – Duckbill

    Bead Board Holders, also commonly referred to as “duckbills,” provide a quick and easy solution for mounting and rigging foam core, bead board, and other lightweight reflectors. Metal plates, white on one side and black on the other, clamp down to hold reflectors firmly while a 5/8″ baby pin allows for easy mounting to c-stands or other hardware.

  • Magic Arm

    The ends have female threads inside pins that a grip head can capture. Capable of handling small light fixtures, nets and flags, or even smaller cameras. Each end of the 2-section arm terminates in a 5/8″ stud.

  • Furniture Clamp Slider w/ 5/8″ Pin

    “Hangie Downie” Clamp Adapter with 5/8 Pin
    Designed to allow the mounting of a small light fixture to a Furniture Clamp
    Can be mounted on any rod measuring up to 1″ diagonally

  • Chain Vise Grip with Baby Spud

    Provides maximum gripping power on any size pipe up to 6″ in diameter.

  • 8″ C-clamp with Spud

     C-Clamp with 2 Baby Pins has 2 separate 5/8″ diameter pins at different angles so that the light fixtures may fit with minimal clearance.

  • C-Boom Pipe Clamp with Ear

    Used for mounting a c-stand in a 4.5″ combo head.

  • Junior Pipe Clamp

    Terminates in a Junior Receiver and has a safety chain and cotter pin attached. Has a uniquely designed hook molded into the clamp which keeps the clamp on the pipe even with a light fixture attached, while the bolt is being tightened.

  • Baby Pipe Clamp

    Has a uniquely designed hook moulded into the clamp which keeps the clamp on the pipe even with a light fixture attached, while the bolt is being tightened. Terminates in a 5/8″ pin and has a safety chain and cotter pin attached.

     

Scroll to Top